Manufacturing inventory software your ERP can trust.
Scan material in, issue it to the work order, record labor and complete into stock. Every scan reaches the ERP you already run.
- Raw material received against the PO and put away to a bin
- Material issue and labor recorded on the job as it happens
- Finished goods and sub-assemblies completed into stock
See it on your own shop floor.
A 30-minute walkthrough of your receiving, production and shipping steps.
Manufacturers and distributors run on Endpoint
Your ERP shows one number. The shop floor shows another.
The ERP only knows what someone tells it, often late and on paper. Switch views to see what scanning changes.
Receiving
Bar stock sits by the saw before anyone puts it away
Material issue
Pulled for a job, never issued
Labor
Hours written on a time card at the end of the shift
Sub-assemblies
Built ahead and parked on a cart
Example data
One work order, scanned from dock to ship.
Each scan adds to the job record while the work happens. Tap a step.
- Received24 sheets, 3/16 in plate, PO 5521, to bin R-127:12 am
- Issued24 sheets to WO-1048 from bin R-128:05 am
- LaborWeld operation, 6.4 hrs recorded2:40 pm
- Completed12 frames into finished stock3:15 pm
- Shipped12 frames on order SO-77304:30 pm
Example data
Built for fabricators and machinery builders.
Fab shops use up stock job by job. Machine builders run deep bills of materials. Pick yours.
Sheet, plate, bar and tube, tracked job by job.
- Raw material scanned in against the PO, into a known bin
- Stock issued to the work order the moment it is pulled
- Labor at each operation, so job cost uses recorded hours
- Over-issues recorded when a job takes more than the BOM plannedSage 100 Manufacturing Advanced
Deep bills of materials, short parts found early.
- Demand calculated through multi-level sub-assembliesProcurement Automation, Sage 100 and Endpoint Cloud
- Purchase orders and work tickets generated from that demand
- Configured products and their BOM built at order entrySage 100 Product Configurator
- Packaging machine M-200Build
- Frame assemblyIn stock
- Drive assemblyBuilding
- GearboxIn stock
- Motor mountShort 4
- Control panelIn stock
Manufacturing inventory management, scanned at every step.
What is included depends on your ERP. Check yours below.
Receive against the PO
Raw material and purchased parts scanned in as they arrive.
Bin-level stock
Every part put away to a bin you can find again.
Material issue by scan
Stock issued to the work order when it is pulled.
Completions into stock
Finished goods and sub-assemblies, ready to pick.
Lot and serial tracking
Captured by scan on controlled items.
Pick, pack and ship
Orders leave with a scan at every step.
Keep your ERP. Add the shop floor.
Your ERP keeps the books and the bills of materials. Pick yours to see how Endpoint fits.
Connected to NetSuite
Endpoint Cloud runs the shop floor and warehouse, and sends inventory back to your ERP.
- Production from material issue to completionManufacturing Package
- Work in progress and BOM consumption
- Multi-level demand to POs and work ticketsProcurement Automation
- Receive, put away, pick and ship by scan
- Lot and serial tracking
Runs inside Sage 100
Every scan posts straight to Sage 100.
- Material issue, labor, time cards and completionsManufacturing Package
- Over-issues, over-completions, automatic labor track-outManufacturing Advanced
- Work tickets tied to sales ordersProduction Management Plus
- Configured products and BOMs at order entryProduct Configurator
- Multi-level demand to POs and work ticketsProcurement Automation
- Multi-bin stock
Runs inside Sage 300 and Sage 500
Your walkthrough covers manufacturing for your edition.
- Barcode scanning inside your Sage ERP
Runs inside Sage Intacct
Production tracking without a second system.
- Work orders and production trackingOPS for Intacct
- Lot, serial and expiry tracking
Runs inside Acumatica
Inventory updates in Acumatica in real time.
- Material issue to production ordersNeeds Acumatica Manufacturing Edition
- Labor and completions, with who did each step and where
- Quality controlQC module
- Receive, put away, pick and ship by scan
- Lot and serial tracking
Connected to Dynamics 365 Business Central or GP
Endpoint Cloud runs the floor and sends inventory back to Dynamics.
- Receive against the PO by scan
- Bin-level put-away
- Lot and serial tracking
- Pick, pack and ship by scan
What our clients say.
4.7 rating on Capterra“How simple it was to integrate and how easy it was to train the employees.”
Small business
“Easy to use and easy to integrate into our ERP system.”
Mid-market
“The multi-bin solution for Sage 100 is robust and allows for flexibility.”
Small business
Questions before you book.
What is manufacturing inventory software?
It tracks raw materials, work in progress and finished goods through receiving, storage, production and shipping. Endpoint runs alongside your ERP, records each step by scan and sends it to the ERP.
Is Endpoint MRP software?
Endpoint works with your ERP's planning rather than replacing it. The ERP keeps the bills of materials; Endpoint records what actually happened, so plans run on real counts. On Sage 100 and Endpoint Cloud, Procurement Automation also calculates multi-level demand and creates purchase orders and work tickets.
Do we have to replace our ERP?
No. Endpoint runs inside Sage and Acumatica, or connects through Endpoint Cloud. Your ERP stays the system of record for the books.
Can we keep shop inventory in Excel?
Many shops start there. A spreadsheet holds whatever someone types in after the work is done, so it drifts from the floor the same way paper does. When the count stops matching the ERP, it is time to scan.
See it on your own jobs.
A 30-minute walkthrough built around your parts, your jobs and your ERP.